Securing a horse onto a Rescue Glide
A non-ambulatory horse must be secured before loading into a rescue trailer or horse ambulance. The most practical means of accomplishing this task is to secure the horse onto a Rescue Glide. Here are the procedures that we use.
1. Position the horse on the Rescue Glide.
A sideways drag is often the most practical and effective way to position the horse correctly on the Rescue Glide. A life vest or similarly padded device is placed under the horse's head to protect its down side eye.
2. Attach the forward strap.
Working from the back side of the horse, attach a strap to the Rescue Glide, insert padding between the strap and the horse, and bring the strap across the horse. (In this case we used old shipping boots for padding.)
3. Tighten the strap.
Using the ratchet, draw the strap snug. The edges of the Rescue Glide will usually curl up slightly.
4. Attach the rear strap.
Work from the back side of the horse and repeat the process used for attaching and securing the forward strap.
5. Adjust both straps.
This step is critical. Tightening one strap will relieve some tension on the other strap. Make sure both straps are snug and that they remain snug.
6. Attach the hobbles.
With someone helping position the legs with a pole hook, hobble the front legs, then hobble the hind legs. Always perform this task across the back of the horse. Even a sedated horse can spasmodically kick when its legs are being handled.
7. Tighten the hobbles.
We use a pulley system to secure the hobbles as it gives us the best control over how tight the horse's legs are drawn in. As with the body straps, some padding should be placed between the pulley rope and the horse.
8. Secure the tail and life vest.
The tail is tied to a strap to prevent the Rescue Glide from running over it. The life vest is tied to the horse's neck to prevent it from coming loose.
9. Prepare to drag the horse on the Rescue Glide.
Attach haul lines to the tug ring at the forward end of the Rescue Glide and drag the horse to the rescue trailer.
- Everyone needs to work in a coordinated manner.
- Even a sedated horse can be dangerous while being secured.
- Stay well clear of the horse's hooves. Even with that repeated warning people end up getting smacked in their ankles which is very painful and sometimes involves fractures.
- Secure the forward strap first. Release the forward strap last. If the horse reacts and tries to get up, it will start with its head. If the horse manages to sit up while still strapped to the Rescue Glide at its abdomen, all sorts of bad things are possible.
- Any time any one reaches over or lays over the horse for any length of time, that person must be tethered to someone on firm ground. Tethering does not mean that the two are tied together. It means that some mechanism is in place where the second rescuer can pull the first rescuer out of danger if the first rescuer slips or the horse reacts.
- Constantly check your work. As some straps are tightened, other straps may work loose.
- Do a final check of everything before moving the Rescue Glide.
- Monitor the horse and strapping while dragging the glide to make sure nothing snags or comes loose.
The Rescue Glide and its associated accessories are manufactured by
Care for Disabled Animals (CDA), located in California.